Chapter 4: Operations
Diagnostic and Maintenance Functions
QuantumLTO-8 HH SAS User’s Guide 47
A Clear Error Code Log: Erases the
contents of the error code log.
Function Code A: Clear Error Code Log
on page 57
C Insert Cartridge into Tape Drive: This
functi
on cannot be selected by itself,
but is a part of other maintenance
functions (such as Run Tape Drive
Diagnostics and Create FUP Tape) that
require a tape cartridge to be loaded.
Function Code C: Insert Cartridge into
Tap e Dr i ve on page 58
E Test Cartridge & Media: Pe
rforms tests
to ensure that a suspect cartridge and
its magnetic tape are acceptable.
Function Code E: Test Cartridge &
Media on page 58
F Write Performance Test: Per
forms
tests to ensure that the drive can read
from and write to tape.
Function Code F: Write Performance
Tes t on page 59
H Test Head: Pe
rforms tests to ensure
that the tape drive's head and tape-
carriage mechanics are working
correctly.
Function Code H: Test Head on
page 60
J Fast Read/Write Test: Pe
rforms tests to
ensure that the drive can read from
and write to tape.
Function Code J: Fast Read/Write Test
on page 61
L Load/Unload Test: Te
sts the drive's
ability to load and unload a tape
cartridge.
Function Code L: Load/Unload Test on
page 63
P Enable Post Error Reporting: When
selected, de
ferred-check conditions are
reported to the host.
Function Code P: Post Error Reporting
Enabled on page 64
U Disable Post Error Reporting: When
selected, de
ferred-check conditions are
NOT reported to the host.
Function Code U: Post Error Reporting
Disabled on page 64
Function Code Diagnostic or Maintenance Function Instructions Location
To Next Page
Loading...
Need help?
General
