Chapter 4: Operations
Diagnostic and Maintenance Functions
QuantumLTO-8 HH SAS User’s Guide 65
3 Exit Maintenance Mode if you do not want to change the current
setting for Post Error Reporting. For instructions, see
Exiting
Maintenance Mode on page 48.
4 To disable Post Error Reporting, Press
and hold the Unload button
for three seconds while P appears in the SCD. The SCD changes to U
after you release the Unload Button.
5 Press the Unload button once per second to select another
Mainte
nance Mode Function. To exit Maintenance Mode, refer to
Exiting Maintenance Mode on page 48.
To Next Page
Loading...
