Quantum Scalar i6000 - Module Floor Cutout

Chapter 3: System Specifications
Module Floor Cutout
Scalar i6000 Planning Guide 65
Module Floor Cutout
The foot pad positions are shown from underneath the library in
Figure 27. The module floor cutouts are the same for the control
module, expansion modules, and parking modules. However, the HDEM
has a different module floor cutout, as seen in
Figure 29 and Figure 30.
Note: Floor cutouts can be used for cable access as well as the access
hole at the top of the module.
Figure 27 Module Floor
Cutout (Bottom View)
front
foot pad
cutout
2.49
(63.25mm)
5.00” (127.02mm)
9.86” (245.34mm)
5.87” (149.1mm)