Chapter 3: System Specifications
LTO Drive Requirements and Compatibility
Scalar i6000 Planning Guide 67
Figure 30 HDEM Floor Cutout
(Front View)
LTO Drive Requirements and Compatibility
The control module and any drive ready expansion module (including
the right parking module in dual-robot configurations) can each contain
up to 12 FC linear tape-open format tape drives (LTO-1, LTO-2, LTO-3,
LTO-4, LTO-5, and LTO-6).
Although all six generations of LTO drives are supported in the library,
the drives are not fully compatible (both read/write) as shown in
Tab l e 9.
To Next Page
Loading...
