GV300 Manage Tool
TRACGV300MT001 - 16 -
2.4.3. Toolbar
It include “COM Setting”, “Operation Log”, “Quick Setting Wizard”, “Real All Configuration”,
“Send All Configuration” , “Save All Configuration”, “Connect/Disconnect to COM”.
[COM Setting]: It is used to set the COM information and password. Setting details please refer
to chapter 2.2.
[Operation Log]: It is used to display/hidden operation log.
[Quick Setting Wizard]: It is used to open quick setting wizard directly. Please refer to chapter
3.1 for details.
[Read All Configuration]: It is used to display/hidden read and load.
“Read From Device”: It is used to read all configuration(except command GTDAT) from
device which connects to PC.
“Load Configuration From File”: It is used to load configuration file to the manage tool.
[Send All Configuration]: It is used to send all configurations(except command GTQSS, GTDAT,
GTRTO) in Command Operation Space.
[Save All Configuration]: It is used to save all configurations in Command Operation Space to
file.
[Connect/Disconnect to COM]: It is used to Connect/Disconnect to COM manually.
2.4.4. Status Bar
There is system status and current status in status bar.
[System Status]: It indicates the count of commands which are waiting and executing to set.
[Current Status]: It indicates current COM status, IMEI, protocol version and software version
which read from device.
To Next Page
Loading...
