Queclink GV300 - 1 Revision History

GV300 Manage Tool User Guide
TRACGV300MT001 - 3 -
1. Revision History
Revision Date Author Description of change
1.00 2011-08-22 Wogle zhou Initial
1.01 2011-11-16 Moon Xie 1) Add AGPS function to AT+GTCFG
2) Add GSM function to AT+GTCFG
1.02 2012-06-18 Happy Peng 1) Add chapter3.2.10 to
introduce how to
configure the jamming behavior function.
2) Add chapter3.2.11 to introduce
how to
configure the white list function.
3) Add chapter3.2.13 to
introduce how to
configure the start stop report function.
4) Add chapter3.2.20 to
introduce how to
configure the start stop report function.
5) Add chapter3.2.31 to
introduce how to
configure the white list function.
6) Update the support version to
GV300R00A05V05M128_NMX
1.03 2012-8-08 Happy Peng 1) Add <SMS ACK Enable> function to
AT+GTSRI
2) Command AT+GTQSS, AT+GTDAT,
AT+GTRTO will not be sent when “Send All
Configuration”.
3) Add read “Mcu Version” and “Hw Version ”
from device to About
4) Added the mode 3 in AT+GTDAT to transmit
data without CRLF
5) Cancel Mode3 in AT+GTAIS
6) Cancel parameters <Fuel Sensor Delay>
、
<Fuel Lost Alarm> in AT+GTAIS
7) Extend the “bit5” to “+RESP:GTTOW” in
<GSM Report> in AT+GTCFG
8) Modified the AT+GTJBS function
9) Change “Bit11_Reserved” in <Response
Mask>
、 <Event Mask> to “Battery Level” in
AT+GTHRM
10) Change “Reserved” in <Working Mode> to
“Use UART to transfer data with Garmin” in
AT+GTURT
11) Update the support version to
GV300R00A06V12M128_NMX
1.04 2012-9-18 Leaf Ye
1） Add parameters <GSM Interval> and <PDP
Queclink
Confidential