Queclink GV65 Plus - Power Connection; Ignition Detection

GV65 Plus User Manual
TRACGV65PUM001 - 13 -
Table 6. GPS Antenna Specification
GPS antenna Specification
Frequency
1575.42MHz
Bandwidth >5 MHz
Beam width >120 deg
Supply voltage 2.7V-3.3V
Polarization RHCP
Gain Passive: 0 dBi min
Active: 15 dB
Impedance 50Ω
VSWR <2
Noise figure <3
VIN (PIN1)/GND (PIN2) are the power input pins. The input voltage range for this device is from
8V to 32V. The device is designed to be installed in vehicles that operate on 12V or 24V systems
without the need for external transformers.
Figure 8. Typical Power Connection
Table 7. Electrical Characteristics of Ignition Detection
Logical status Electrical status
Active 5.0V to 32V
Inactive 0V to 3V or open
3.7. Power C
onnection
3.8. Ignition Detection
Queclink
Confidential