Quectel EM06 Series - Pin Description

LTE-A Module Series
EM06 Series Hardware Design
EM06_Series_Hardware_Design 18 / 69
3.2. Pin Description
The following tables define and describe the pins of EM06 series on a 75-pin application.
Table 3: Definition of I/O Parameters
Table 4: Pin Description
Type
Description
DI
Digital Input
DO
Digital Output
IO
Bidirectional
OD
Open Drain
PI
Power Input
PO
Power Output
Pin No.
Pin Name
I/O
Description
Comment
1
CONFIG_3
Not connected internally
2
VCC
PI
Power supply
Vmin = 3.135 V
Vnorm = 3.7 V
Vmax = 4.4 V
3
GND
Ground
4
VCC
PI
Power supply
Vmin = 3.135 V
Vnorm = 3.7 V
Vmax = 4.4 V
5
GND
Ground
6
FULL_CARD_
POWER_OFF#
DI
A signal to power on/off the module
When it is at low level, the module
powers off;
When it is at high level, the module
powers on.
Pulled down internally
7
USB_DP
IO
USB 2.0 differential data bus (+)