LTE-A Module Series
EM06 Series Hardware Design
EM06_Series_Hardware_Design 44 / 69
5 Antenna Connection
The EM06 series module is mounted with three 2 mm × 2 mm antenna connectors (receptacles) for
external antenna connection: a Main antenna connector, a Rx-diversity antenna connector which is used
to resist the fall of signals caused by high speed movement and multipath effect, and a GNSS antenna
connector. The impedance of the antenna connectors is 50 Ω.
5.1. Main/Rx-diversity/GNSS Antenna Connectors
5.1.1. Antenna Connectors
The Main, Rx-diversity and GNSS antenna connectors are shown as below.
Figure 25: Antenna Connectors on the Module
To Next Page
Loading...
