Quectel RG50-Q Series User Manual

5G/LTE-A Module Series
5G EVB User Guide
5G_EVB_User_Guide 13 / 38
Used to reset the module
USB
J1101
USB Type C interface
PCIe to USB
J1601
PCIe to USB interface, not supported by default
PCIe Configuration
Switch
S1501
Used to configure the module communication with
different devices via PCIe signals
SDIO Configuration
Switch
S2501
Used to switch between SD card and eMMC
RGMII Configuration
Switch
S1801, S1802
Used for RGMII configuration
Codec Configuration
Switch
S2801
Used for codec configuration
Audio
J0802
Codec board TE-A connector
J0801
Designed for loudspeakers
J0901
Audio jack for earphone
(U)SIM
J1401
(U)SIM1 card connector
J1402
(U)SIM2 card connector
SD Card
J1301
SD card connector
Main UART
J2002
MAIN_UART port for data communication
Debug UART
J2003
DBG_UART port for debugging
Status Indicator
D0201
Power supply on/off indicator, indicating whether
the module’s power supply is on or off.
D0202
Module operation status indicator, indicating
whether the module is powered on.
D0203
Net mode indicator, indicating NET_MODE status
of the module.
D0204
Net status indicator, indicating NET_STATUS
status of the module.
D0205
Sleep status indicator, indicating SLEEP status of
the module.
Module TE-A
J0101, J0102
Module TE-A connectors
PHY TE-A
J1901, J1902
PHY TE-A connectors
Wi-Fi TE-A
J0701, J0702
Wi-Fi TE-A connectors
AP TE-A
J2101, J2102
AP TE-A connectors

Quectel RG50-Q Series Specifications

General

Brand	Quectel
Model	RG50-Q Series
Category	Control Unit
Language	English