EasyManuals Logo
Home>Quest Engineering>Metal Detector>X10

Quest Engineering X10 User Manual

Quest Engineering X10
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
PRODUCTS CARE
NOTICE! Do not twist the coil tail and connector to avoid wire damage.
NOTICE! Do not store the device where prolonged exposure to extreme temperatures can
occur to avoid device damage.
NOTICE! Never use a hard or sharp object to operate the touch pad, or damage may
result.
NOTICE! Avoid chemical cleaners, solvents, and insect repellents that can damage plastic
components and finishes.
NOTICE! Secure the weather cap tightly to prevent damage to the USB port.
NOTICE! Even small amounts of sweat or moisture can cause corrosion of the electrical
contacts when connected to a charger.
CLEAN THE DETECTOR
Wipe the device using a cloth dampened with a mild detergent solution.
Wipe it dry. After cleaning, allow the device to dry completely.
Use a soft, clean, lint-free cloth. If necessary, lightly dampen the cloth with water.
If using a dampened cloth, turn off the device and disconnect the device from power.
Gently wipe the screen with the cloth.
It can withstand heavy rain. Submersion in water can cause damage to the device.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Quest Engineering X10 and is the answer not in the manual?

Quest Engineering X10 Specifications

General IconGeneral
BrandQuest Engineering
ModelX10
CategoryMetal Detector
LanguageEnglish

Related product manuals