23
CHC1102M GB F - REV005B
GB
SETTINGS MENU - CALIBRATION
SET MEASURE
Use this option to select the unit of measurement relative to measure-
ment of chain lowered.
SET MEASURE
SET VALUE:
METERS FEET
Confirm value and go back to CALIBRATION menu.
Selectable options: METERS or FEET. (default: METERS).
Select the values available.
LANGUAGE
ITALIANO
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
Confirm value and go back to SETTINGS menu.
Select the data items.
SETTINGS MENU
LANGUAGE
Use this option to select the language in which the system messages
are displayed.
The LANGUAGE sub-menu appears as shown below.
SETTINGS MENU
CALIBRATION
Use this option to calibrate the chain counter according to the windlass
it is mounted on.
The CALIBRATION sub-menu appears as follows:
CALIBRATION
GYPSY LAP
SET MEASURE
MAGNETS NUMBER
FREE FALL
EXIT
Confirm value and go to next parameter; if EXIT has been selected the
system goes back to SETTINGS menu.
Select the data items in the menu.
SETTING THE CHAIN COUNTER
To Next Page
Loading...
Need help?
General
