Quicksilver 810 Arvor - Engine

Quicksilver 810 Arvor — General Informaon
10
360
o
All Around Light (White), visible 2NM
112.5
o
Stbd Navigaon
Light (Green), visible 2NM
All around light folds downs on the
hardtop
112.5
o
Port Navigaon
Light (Red), visible 2NM
12. Engine
Your boat is propelled by a single Mercury diesel inboard engine. The maximum propulsion power
rang for the cra is 169 kW. Do not operate this cra with an engine power rang larger than that
posted on the power capacity label in the cra. The maximum power rang label is located at the
helm, under the capacity plate.
Quicksilver® recommends that you fully comply with the manual provided by the engine
manufacturer. Follow the recommended maintenance and warranty schedule in your Engine
Operator’s Manual. Refer to the Engine Owner’s Manual for operang instrucons and warranty
informaon. The engines are under warranty from Mercury, not by Quicksilver®.
Do not operate this cra with an engine of rated power
greater than that posted on the capacity label. Do not
operate at maximum speed while in congested waterways,
or in weather or sea condions of reduced visibility, high
winds or large waves. Reduce speed and wake as a courtesy
to others. Observe & obey speed limits and no wake zones.
The Internaonal Regulaons for Prevenng Collisions at
Sea (COLREG) and the rules of the road require that a
proper lookout be maintained at all mes and observance
of right of way be respected. Always be certain to have
sucient distance to stop or manoeuver if required to avoid
collisions.