Quicksilver 810 Arvor - Page 42

Quicksilver 810 Arvor — System & Component Overview and Operaon
30
Cabin engine control
Helm selector switch
Exterior helm engine control
Gear & throle mechanism
Main helm
Exterior helm
Exterior Helm
Helm Control Transfer
To switch control from the main helm to the exterior helm, pull out and rotate the handle clockwise
90 degrees unl it locks into posion. You will now have control of the engine at the exterior helm. To
return control back to the main helm, pull out and rotate the handle counter-clockwise 90 degrees
unl it locks into posion.
The steering system is independent of the helm selector switch and will operate at all mes. DO NOT
TURN THE STEERING WHEEL AT THE HELM THAT DOES NOT HAVE FULL CONTROL OF THE BOAT!
Hydraulic Steering
The exterior helm comes with an addional steering helm, steering wheel, and steering hoses that
connects to the base steering system. The operaon of the system is similar, where when you turn the
steering wheel, the helm pump forces hydraulic uid through hoses to and from the steering cylinder
which is connected to the ller arm. Even though the helms are connected, the steering wheels will
not rotate together when one wheel is turned.