To Next Page

To Previous Page

Advanced Feature

To access the Advanced menu and adjust the settings, perform the following steps:

1. Enter the OSD menu.

2. Press the ◄ or ► button to select the Installation II menu.

3. Press the ▲ or ▼ button to select the Advanced menu and then press .

4. Press the ▲ or ▼ button to move the cursor up or down in the Advanced menu.

5. Press the ◄ or ► button to change values for each applicable setting.

ITEM DESCRIPTION

OSD Menu Setting

Press to enter the OSD setting menu. See page 38 for more

information on OSD Menu Setting.

Peripheral Test

Press to enter the Peripheral Test menu. See page 38 for

more information on Peripheral Test.

Press to enter the 3D menu. See 3D on page 39.

Low Power Mode

Press the ◄ or ► button to enable (<1W power consumption) or

disable Low Power Mode.

Note:

Enable Low Power Mode to completely power down when

the projector is turned off. Disable Low Power Mode to allow

multimedia functionality when the projector is turned off.

Note:

To use the 3D function, the Play Movie in 3D setting found in your player under the 3D Disc

Menu must be enabled. 3D functionality works when the input source supports 120Hz.

1. The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting.

2. When the projector is connected to an appropriate 3D source, the 3D OSD menu item is

enabled for selection.

3. Use 3D glasses to view a 3D image.

4. You need 3D content from a 3D DVD or 3D media le.

5. You need to enable the 3D source (some 3D DVD content may have a 3D on-off selection

feature).

6. You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install

a driver on your PC and connect a USB emitter.

7. The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D).

8. Power on the glasses. Glasses normally have a power on-off switch. Each type of glasses has

their own conguration instructions. Please follow the conguration instructions that come with

your glasses to nish the setup process.

Qumi Q5 User Manual

Questions and Answers: