© Copyright Qvis ®. All documentation rights reserved. 3
1.4 All-Weather Outdoor Design
IP66 Protection standard
TVS 3000V Protection standard
1.5 Preset Position Set Up and Call Up
Within the Preset function the camera stores the current pan/tilt angle,
zoom, and other position parameters into memory. When necessary
the camera recalls these parameters and adjusts the camera to a
particular position. The user can store, recall and clear the presets
easily and promptly by using the keyboard controller. The camera can
store up to 256 presets.
1.6 Auto Scan
Users can set up the left and right boundaries by using a control
keyboard. Then the camera can scan between these boundaries. It
can support up to 8 scanning path groups.
1.7 Cruising Track
The preset position can be programmed to be recalled in a set of
sequences. This sequence can be set to let the camera scan from one
position to the next in a cycle at a set speed. This feature is called the
‘auto cruise’. The cruise sequence and dwell time of each preset can
be set. It supports up to 8 cruising tracks, each cruising track with 32
presets.
1.8 Pattern Tour
Camera can memorize 600 second running paths or 500
programmable instructions. When starting a pattern tour, the camera
will move automatically according recorded action path. It supports 4
groups of pattern tours.
To Next Page
Loading...
Need help?
General
