Qvis IPTZ-IR30A User Manual

© Copyright Qvis ®. All documentation rights reserved. 51
3.13 (AUTO) SCAN
The dome supports auto scan 8 groups. Please
check the following steps to set up a scan.
1. SCAN NO.: Move the cursor here and click
IRIS + to enter the setup of SCAN Number.
Click the up or down button to select a preset
number (1-8) and click IRIS + to confirm.
2. TITLE: Move the cursor here and click IRIS
+ to enter the setup of SCAN Title. Check the
detailed above in DOME TITLE settings.
3. START: Move the cursor here and click IRIS
+ to start the current scan.
4. <LEFT LIMIT>: Move the cursor here and
click IRIS + to enter. Move the dome to a
defined position as left limit and click IRIS +
to save this left boundary.
5. <RIGHT LIMIT>: Move the cursor here and
click IRIS + to enter. Move the dome to a
defined position as right limit and click IRIS +
to save this right boundary.
6. SCAN SPEED: Move the cursor here and
click IRIS + to set up the scan speed ranging
1-30.
LANGUAGE: ENGLISH
INFORMATION
DOME SETTINGS
[MOTION]
RESTART
FACTORY DEFAULT
EXIT
MAIN MENU
PRESET
[SCAN]
SEQUENCE
PATTERN
AUTO TRACKING
BACK EXIT
MOTION
SCAN NO. : 1
TITLE
START
<LEFT LIMIT>
<RIGHT LIMIT>
SCAN SPEED: 20
BACK EXIT
SCAN

Qvis IPTZ-IR30A Specifications

General

Brand	Qvis
Model	IPTZ-IR30A
Category	Security Camera
Language	English