6. TRACKING SCENE SET: Here the user
can set up the scene the dome will go
back to when the camera has finished
auto tracking. Move the cursor here and
click IRIS + to enter. Move the dome to
the wanted scene and click IRIS + to
confirm.
7. DELETE: Move the cursor here and
click IRIS + to delete the return scene.
8. RETURN DELAY: To set up the time
that dome will waiting to return to this
scene.
9. RESTART:The dome allows the user to
reset its settings remotely under this
menu.
Move the cursor here and click IRIS + to enter.
Select “OK” or “CANCEL” to continue the reset
or cancel the reset.
To Next Page
Loading...
Need help?
General
