2.1 Active Sensors
Rada Pulse 120/122 Sensors
The 120 sensor is a short range active sensor, and is designed to be installed within
a shower, W.C or basin area.
The 122 sensor is a long range active sensor, and is designed to be installed within
a urinal area.
All electrical connections are totally sealed, and the system operates at a very safe
low voltage.
The sensor is supplied with 3.0 metres of 2 core cable and is xed to the wall using
two xing screws (supplied). The screws are then concealed for security, by a chrome
plated cover.
Rada Pulse 129 Sensor
The 129 sensor is a short range active sensor, and is designed to be installed within
a shower, W.C or basin area.
All electrical connections are totally sealed, and the system operates at a very safe
low voltage.
The sensor is supplied with 3.0 metres of 2 core cable and is xed to the wall using
two xing screws (supplied). The sensor is housed within a chrome plated solid disc
with a recessed rear foam seal.
Rada Pulse LR Sensor
The LR sensor is a short range active sensor, and is designed to be installed within
a shower, W.C or basin area.
The LR Sensor is a chrome plated vandal resistant sensor designed to be recessed
or built within the wall surface, to allow for extra security.
All electrical connections are totally sealed, and the system operates at a very safe
low voltage.
The sensor is supplied with 3.0 metres of 2 core cable and is xed in the wall using
M6 xing studs (supplied).
2.2 Passive Sensors
Rada Pulse 124/125/126 Ceiling Sensor
The Rada Pulse Ceiling Sensor are passive sensors for the following applications:
Application Sensor Type
Washbasin 124
Single Urinal 125
Group Urinal 126
Note! Refer to section: 'Specications' for detection areas.
To Next Page
Loading...
Need help?
General
