Radial Engineering PZ-PRO - Specifications; Warranty

PZ-Pro™
Radial Engineering Ltd.
13
SPECIFICATIONS
Audio Circuit Type: .................................................................... Proprietary active circuit
Number of channels: ....................2x Inputs, Mono Pre and Post EQ XLR balanced Out
Frequency Response: ................................................................... 20Hz - 20kHz ±0.5dB
Input Gain: .................................................. +20dB (Instrument Input), +55dB (Mic Input)
Boost Gain: .....................................................+10dB (PZ Boost) +15dB (Variable Boost)
Maximum Input - Instrument: ................................................................................ +20dBu
Maximum Input - Microphone: .................................................................................. 0dBu
Clip Level: ......................................................................................+10dBu @ XLR output
Total Harmonic Distortion: ............................. <0.005% (+4dBu, 20Hz-20kHz, unity gain)
Input Impedance: ........... 220k Ohms at input jack (10Meg Ohms when PZ Boost active)
Output Impedance - XLR: ................................................................................. 150 Ohms
Output Impedance - 1/4" Amp Out: .................................................................... 1k Ohms
Output Impedance - Tuner Out: ....................................................................... 2.6k Ohms
Noise: ...................................................................................................................... -91dB
General
Construction: .............................................................................................14-gauge steel
Size: ......................................................... 9.10"L x 5.32"W x 1.82"H (231 x 135 x 46mm)
Weight: ......................................................................................................5.0lbs (2.27kg)
Power: ......................................................................15VDC, 400mA (center pin positive)
FCC Approval: ................................................Complies with section 15 of the FCC rules
Conditions: .............................For indoor use at temperatures between +5°C and +40°C
Warranty: .................................................................................Radial 3-year, transferable
Specications are subject to change without notice
In order to meet Electromagnetic and Safety Compliance requirements Radial
Engineering is recommending to use the PZ-Pro product with the provided
R800 9415 00 power adapter, Model: GME6A-150040FX, Input: 100-240V, 50-60Hz,
0.25A, Output 15V, 0.4A, I.T.E.Power Supply, considering all Electromagnetic and
Safety compliance was performed using only this power adapter mentinoned above