9 QD134-15
1.6 ECU LOCATION
The ECU is located on the right-hand side of the cockpit. The ECU has been made accessible so that it
can be easily removed when the engine is rebuilt for example.
To remove the ECU, pull the silver clip away and fold to an upright position, then the ECU should
rotate around on the inside edge until it releases on the opposing side. It will need to be hooked in
first when fitting. This should not be removed unless there is an issue or the engine is being rebuilt.
Next to the ECU you will also find the Barometric pressure sensor and electrical relays (Fuel pump,
water pump, coolant radiator fan (optional))
1.7 REVERSE LEVER LOCATION
The lever moves a gear in the differential putting the output drive into reverse.
To engage reverse gear the car must be stationary and in neutral. Push the lever forwards until the
gear is fully engaged. Put the gearbox into first gear as normal and carefully reverse.