16
Programming
• MULTIPLE – Receives SAME alert
signals for up to nine programmed
FIPS codes.
• SINGLE – Receives a SAME alert
signal for the FIPS code
programmed in memory location 1.
1. When
LOCATION appears, press
g
.
The current response location
appears.
2. Repeatedly press
e
or
d
until the
desired setting (
ALL LOC, SINGLE, or
M ULTIPLE) appears.
All Locations
To store all locations, press
g
when ALL
LOC
appears. A beep sounds and
LOCATION flashes at the bottom of the
display.
Single
1. To store a single location, press
g
when
SINGLE appears. 1-------
appears.
2. Press
g
. The first digit of the code
flashes.
3. Press
e
or d to select the first
digit. When the correct number
appears, press
g
to move to the
next digit. If you made a mistake,
To Next Page
Loading...
