16
Searching
Service Bank Search
The scanner is preprogrammed with all the
frequencies allocated to Ham, Marine, Aircraft,
and Police (Fire/Emergency) transmissions.
To search the service banks, press SVC. The
current service symbol appears and the scanner
starts searching. To select a different service bank,
press 1/MAR, 2/POL, 3/AIR, or 4/HAM.
Note: Because there are many different
frequencies allocated to Ham and
Aircraft, it can take several minutes to
search all the service frequencies.
Storing Frequencies Found During a Search
To store frequencies you find in limit search, fine
tune, service bank, or Signal Stalker I searches:
1. Press PSE at the frequency you want to store.
2. Press ENT/PGM to enter programming
mode.
3. The screen flashes, alternating between the
smallest empty channel number,
000.000,
and the frequency you want to store.
Note: If there are no empty channels, the
scanner selects the first channel in the
bank.
4. Enter the bank number where you want to
store the frequency.
5. Press T or S to change the channel.
6. Press ENT/PGM to store the frequency or CL
to cancel.
To Next Page
Loading...
