Setting the Battery Save Function
The battery save feature conserves energy when
the scanner is set to monitor a manually selected
channel and it is not actively scanning. The
scanner repeatedly turns off the internal power for
one second, and then turns it back on for half a
second to check for a transmission.
To turn the battery save function on or off:
1. Press and hold TUNE/MENU to open the
menu.
2. Press T or S to select b-SAVE, then press
ENT/PGM.
3. Press T or S to select On or OF. Press ENT/
PGM.
4. Press TUNE/MENU or CL to exit the menu
mode.
To Next Page
Loading...
