Radio Shack 20-135 - Setting the Power On Backlight; Setting the Keytone

28
Settings
2. Press T or S to select AutLit, then press
ENT/PGM.
3. Press T or S to select On or OF. Press ENT/
PGM.
4. Press TUNE/MENU or CL to exit the menu
mode.
Setting the Power On Backlight
The backlight can be set to light for 5 seconds
when you power on the scanner. To turn the
power on backlight on or off:
1. Press and hold TUNE/MENU to open the
menu.
2. Press T or S to select PonLit, then press
ENT/PGM.
3. Press T or S to select On or OF. Press ENT/
PGM.
4. Press TUNE/MENU or CL to exit the menu
mode.
Setting the Keytone
Each time you press any of the scanner’s keys, the
scanner sounds a tone. To turn the scanner’s key
tone on or off:
1. Press and hold TUNE/MENU to open the
menu.
2. Press T or S to select bEEP, then press
ENT/PGM.
3. Press T or S to select On or OF. Press ENT/
PGM.
4. Press TUNE/MENU or CL to exit the menu
mode.