20
SPECIAL FEATURES
USING THE SPECIAL FEATURES
Your transceiver has several advanced features that give you ad-
ditional control and convenience while using it.
This list provides additional information about your transceiver’s
special features.
Feature See:
Step
— let’s you change the incre-
ment you set to tune frequencies in
the 10-meter band.
Page 21
Call
— recalls a specific frequency in
memory channel 2.
Page 22
Scan
— scans incoming signals. Page 22
Last Channel Recall
— returns to the
last channel that was transmitted.
Page 23
M-LOAD
— recalls frequencies stored
in memory Channels 1–5.
Page 23
NB (Noise Blanker)
— reduces elec-
trical noise.
Page 23
Shift
— lets you set the frequency shift
direction and offset frequency.
Page 24
T-LOW (Tone Low)
— turns the high-
cut filter on or off.
Page 24
M-SAVE (Memory Save)
— saves up
to five frequencies into memory chan-
nels.
Page 25
FINE (Clarifier)
— tunes in stations or
tunes out interference broadcast using
an SSB signal.
Page 25
19-1110.fm Page 20 Friday, March 24, 2000 9:42 AM
To Next Page
Loading...
