16
A QUICK LOOK AT THE CONTROLS
OFF/VOLUME
— turns the radio on/off; adjusts the volume
RF-G/MIC-G
— attenuates strong signals; reduces the micro-
phone’s gain and SSB transmitting power
STEP/NB/1
— selects the frequency tuning step; turns the noise
blanker on/off; selects memory Channel 1
CALL/2
—
quickly recalls a frequency in memory Channel 2; se-
lects memory Channel 2
SCAN/SHIFT/3
— starts/stops scanning; selects the frequency
shift; selects memory Channel 3
LCR/4
— recalls the last tuned channel; selects memory Channel 4
MODE/T-LOW/5
— selects the operation band, AM/FM/USB/LSB;
turns hi-cut filter on/off; selects memory Channel 5
M-LOAD/M-SAVE
— loads from/saves to a memory location
FINE/PUSH FUNC
— adjusts fine tuning; activates second function
SQUELCH
— sets the squelch level to block weak signals
TUNE
— selects a frequency
19-1110.fm Page 16 Friday, March 24, 2000 9:42 AM
To Next Page
Loading...
Need help?
General
