23
Using LCR (Last Channel Recall)
Press
LCR
to return to the last channel you selected.
Using M-LOAD
You can recall frequencies stored in memory Channels 1–5.
Note:
See “Using M-SAVE (Memory Save)” on Page 25 for more
information about storing frequencies in memory channels.
To recall a memory channel, press
M-LOAD
so
L
appears, then,
press the desired memory channel number.
Using NB (Noise Blanker)
If the transceiver’s reception is disturbed by interference from
electrical noise (such as ignition noise), you can reduce the noise
by using the transmitter’s noise blanker feature. To turn on or off
the noise blanker, press
PUSH FUNC
then
NB
.
NB
appears while
the noise blanker is on.
19-1110.fm Page 23 Friday, March 24, 2000 9:42 AM
To Next Page
Loading...
Need help?
General
