25
Using M-SAVE (Memory Save)
Follow these steps to save up to five frequencies into memory
channels.
1. Select the desired frequency.
2. Press
PUSH FUNC
then
M-SAVE
.
S
appears.
3. While
S
appears, press the desired memory channel num-
ber. The transceiver stores the frequency you selected into
the memory channel you selected.
4. To recall a frequency you stored, see “Using M-LOAD” on
Page 23.
Using FINE (Clarifier)
When you listen to an SSB signal, rotate
FINE
to tune in slightly
off-frequency stations or to tune out interference from adjacent
channels.
19-1110.fm Page 25 Friday, March 24, 2000 9:42 AM
To Next Page
Loading...
Need help?
General
