22
Using CALL
The transceiver’s call memory lets you quickly recall a specific
frequency in memory Channel 2.
Note:
See “Using M-SAVE (Memory Save)” on Page 25 for more
information about storing a frequency in memory channel 2.
Press
CALL
to recall the stored frequency at any time. The fre-
quency flashes.
Press
CALL
again and the last selected frequency appears.
Using SCAN
Press
SCAN
to scan incoming signals.
SCAN
appears and the
transceiver stops for 5 seconds on each channel when it detects
a signal.
To stop scanning, press
SCAN
or the PTT button on the micro-
phone.
SCAN
disappears.
19-1110.fm Page 22 Friday, March 24, 2000 9:42 AM
To Next Page
Loading...
Need help?
General
