33
Using Auto-Reply
If you turn on the auto-reply feature, the HTX-212 automatically sends the
sequence stored in the currently-selected DTMF memory when it receives
a DTMF page.
Follow these steps to turn on auto-reply.
1. Press VFO.
2. Hold F for at least 1 second. FUNC flashes.
3. Press MR. The HTX-212 displays the first configuration menu item.
4. Repeatedly press s to select the Ar option. Then rotate TUNE, or
press UP or DOWN on the microphone, to set the option to on.
5. Press MR to exit the configuration menu.
To turn off auto-reply, set the option to OFF in Step 4.
USING SUBAUDIBLE TONES
Some repeaters require you to transmit a subaudible tone to activate
them. You can set your HTX-212 to transmit any of the 38 standard sub-
audible tones. You can also limit incoming reception by setting the HTX-
212 to open the squelch only when someone transmits a subaudible tone
you select.
Valid Subaudible Tones
Code Freq. (Hz) Code Freq. (Hz) Code Freq. (Hz)
XZ 67.0 1B 107.2 6Z 167.9
XA 71.9 2E 110.9 6A 173.8
WA 74.4 2A 114.8 6B 179.9
XB 77.0 2B 118.8 7Z 186.2
WB 79.7 3Z 123.0 7A 192.8
YZ 82.5 3A 127.3 M1 203.5
YA 85.4 3B 131.8 M2 210.7
YB 88.5 4Z 136.5 M3 218.1
ZZ 91.5 4A 141.3 M4 225.7
ZA 94.8 4B 146.2 M5 233.6
ZB 97.4 5Z 151.4 M6 241.8
1Z 100.0 5A 156.7 M7 250.3
1A 103.5 5B 162.2
19-1125.fm Page 33 Tuesday, August 3, 1999 9:47 AM
To Next Page
Loading...
Need help?
General
