60
Beyond the Basics
4. Press PROG to enter the program mode. M changes
to P.
5. Press FUNC.
6. Press CLEAR. The frequency number changes and
0.0000 appears.
deleting all frequencies in a channel
bank
1. Press PROG.
2. Press FUNC then the bank number you want to clear.
Bank X selected. Fn+CLR to delete all frequencies. TEXT to
edit tag appears.
3. Press FUNC then CLEAR. Clear entire bank? Press 1 to clear
all, any other key aborts appears.
4. Press 1 to clear the selected bank’s all channel
memory. please stand by. appears while the scanner
clears all channel memory. Press any other than 1
to cancel clear.
using delay
Many conversations might have a pause of several
seconds between a query and a reply. To avoid missing
a reply, you can program a 2-second delay into any
of your scanner’s channels. Then, when the scanner
stops on the channel, DLY appears and the scanner
continues to monitor the channel for 2 seconds after
the transmission stops before it resumes scanning. The
delay feature is also available while searching.
To Next Page
Loading...
