7
The Basics
your scanner’s keypad
TRUNK — stores the trunking ID code or holds
the trunking ID while scanning.
L/OUT — locks out selected channels and ID
codes, and skips specifi ed frequencies during
a search.
CLEAR — clears an incorrect entry.
PROG — programs frequencies in selected
channels.
PWR/VOL/SQ — long knob turns OFF/ON, and
controls volume. Short knob controls squelch.
PC/IF — connect data cable for cloning or
connecting to a PC.
s — attach headphones with 1/8” jack here.
To Next Page
Loading...
