61
Beyond the Basics
Delay is automatically set as the default for each
channel when you turn on the scanner.
To turn delay on or off, press ./DELAY. DLY (delay on) or
dly (delay off) appears on the display.
locking out channels or frequencies
You can scan existing channels or search frequencies
faster by locking out channels or frequencies that have
a continuous transmission, such as a weather channel.
locking out channels
To lock out a channel while scanning, press L/OUT when
the scanner stops on the channel. To lock out a channel
manually, select the channel then press L/OUT so lo
changes to LO on the display.
You can still manually select locked-out channels.
To remove the lockout from a channel, manually select
the channel and press L/OUT so LO changes to lo.
reviewing locked-out channels
To review all locked out channels, press MAN. Then
repeatedly alternate between pressing FUNC and then
L/OUT to view each locked-out channel. When you fi nish
reviewing locked-out channels, press MAN.
locking out frequencies
To lock out a frequency during a search, press L/OUT
when the scanner stops on that frequency. The scanner
locks out the frequency, then continues searching.
The scanner does not store locked out frequencies
during a search.
To Next Page
Loading...
