9
The Basics
EXT SP — connect an
external speaker here.
ENT — press to
confi rm frequency
and text entries.
your scanner’s rear view
ANT — connect the
supplied antenna or an
external antenna here.
DC 13.8V — connect a
power source here.
SCREW HOLE — use to mount
the scanner in a car with some
hardware (screw not supplied).
RESET—
press to
reset your
scanner.
Press to enter a number or a
character (in text mode).
./DELAY — press to enter a
decimal point, space, or hyphen.
Press to program delay time for a
channel/search bank.
To Next Page
Loading...
