3. Press p or q to scroll to the desired parameter.
Note: Press FUNC p or FUNC q to jump to the top or bottom of
the menu.
4. Press t or u to select options for selected field.
5. Press SAVE softkey to save new settings to radio configuration
memory.
Delay
Sometimes, several seconds can pass between transmissions. To
avoid missing a reply, a delay is automatically set for each channel.
The scanner stops for 2 seconds after a transmission stops before it
resumes scanning or searching.
To turn the delay on or off:
Press FUNC •/Delay when the scanner stops on a transmission.
Lowercase
d in the display indicates delay is off. Uppercase D
indicates delay is on.
Note: Delay and delay time can also be set in each Scannable
Object Menu. Search Delay time can be set in the Global menu.
Refer to “Appendix B: Detailed Menu Reference” on page 96 for a
description of delay settings.
Adjusting the LCD Contrast
You can set the LCD contrast from level 1 to 7.
1. Press PROG for Program Mode.
2. Press GLOB softkey to access Global menu.
3. Press p or q to scroll CONTRAST.
4. Press t or u to select contrast level 1 to 7.
5. Press SAVE softkey to save new setting.
To Next Page
Loading...
