4. On the SOURCE radio, scroll to Clone Send: then press SEL
when you are ready to send data from your SOURCE radio to the
TARGET radio.
Both working memory and global settings are transferred.
Note: The contents of working memory on the TARGET radio will be
overwritten immediately when SEL is pressed on the SOURCE radio.
Memory Report
To display the memory usage report:
1. Press
PROG.
2. Press GLOB softkey to access the Global menu.
3. Press p or q to scroll to Memory Info:.
4. Press SEL to view the memory usage report.
5. Press p or q to scroll the display.
To Next Page
Loading...
