2. Press SEL to select On or Off. An asterisk (*) indicates the sub
band is enabled.
3. Press p or q to select Tag: to name your STLK object.
4. Use the number keys to enter a name. See “Appendix C: Text EntryAppendix C: Text Entry
and QuickText” on page 115 for information on entering text.
5. Press Save softkey to store your STLK search as an object.
To activate STLK search:
1. Press MAN during scanning to enter Manual Mode.
2. Press p or q to scroll through the objects to
STLK.
3. Press the STLK softkey.
To Next Page
Loading...
