Radio Shack RPO-137 - Copying a Frequency

22
• Press Func to toggle the input mode
between ABC, abc, and 123.
• Press •CLR once to erase one character.
Press and hold to erase all characters.
• Press E
PGM
to save the tag and exit editing
tag.
For example, to enter the word “Scanner”
1. Press 7PQRS four times to enter “S.”
2. Press Func to switch the capital letter to small.
3. Press 2ABC three times to enter “c.”
4. Turn the knob to move the cursor.
5. Press 2ABC one time to enter “a.”
6. Press 6MNO two times to enter “n.”
7. Turn the knob to move the cursor.
8. Press 6MNO two times to enter “n.”
9. Press 3DEF two times to enter “e.”
10 Press 7PQRS three times to enter “r.”
11. Press E
PGM
to end the user’s text entry.
Copying a Frequency
To copy a frequency to a channel:
1. Manually select the channel which contains
the frequency you want to copy.
2. Press E
PGM
.
3. Press E
PGM
during program mode. Scanner
displays the Edit Channel Menu.
4. Rotate the knob to select 4: Copy Channel, then
press E
PGM
.
5. Rotate the knob to select the bank where you
want to copy the frequency, then press E
PGM
.
6. Rotate the knob to select the channel you
want to copy the frequency, then press E
PGM
.