The frequency has been copied.
To cancel the copy, press Menu.
Searching
If you do not have a reference to frequencies in
your area, find a transmission using a Fine Tune,
Chain, or Service Bank Search.
While searching, press Func + 2ABC /DLY to turn
the delay on or off).
Fine Tune
To search up or down from the currently displayed
frequency using fine tune.
1. Press SRCH in scan mode or press Func +
SRCH in search mode.
2. Rotate the knob to select 0: Fine Tune, then
press E
PGM
. SRCH appears during searching.
Fine tune is also available from an entered
frequency.
1. Press SCAN/MAN to enter manual mode.
2. Use the number keys and •CLR to enter a
frequency.
3. Press SRCH. Fine Tune appears.
4. Press SRCH again to start fine tune.
Note: If you enter an invalid frequency, the
scanner displays Invalid Freq. Press •CLR to
clear.
Service Bank Search
You can search for Car Band, Marine, CB Band,
FRS/GMRS/MURS, Fire/Police, Aircraft, and Ham
Band transmissions without knowing the specific
frequencies used in your area. The scanner is
preprogrammed with all the frequencies allocated
To Next Page
Loading...
