RD1000™ Operation Manual 27
3.5.6 Depth
The depth setting is an estimate of the total depth displayed on the
Scanning Screen based on the current Soil Type setting. The depth
setting ranges from 1 to 8 meters.
The system always collects data to a depth of approximately 8
meters but the Depth setting on this menu determines how much
of the data is displayed on the screen. It is possible to scan with a
Depth setting of, say 2 meters, pause scanning and then increase
the depth setting to re-display the image to look for deeper targets.
3.5.7 Quit
Exits the Scanning and Image Settings Screens and returns to the
Systems Settings Screen.
Figure 3.23: reading
depth
To Next Page
Loading...
Need help?
General
