RD1000™ Operation Manual 39
6.3 Skid Pad
The bottom of the GPR Sensor is covered with one large wear-
resistant skid pad. The skid pad is designed to take the majority of
the abrasive wear. If the pad wears down enough, the less-resistant
plastic housing may start to wear. If this occurs, it is best to replace
the skid pad. It is easily removed with a screwdriver and a new one
can be purchased from the vendor.
6.4 Odometer
The odometer is factory calibrated and does not require
maintenance.
To Next Page
Loading...
Need help?
General
