RD1000™ Operation Manual 43
name, address and other pertinent contact information of the
user, the desired geographical area(s) of operation, and the FCC
ID number and other nomenclature of the UWB device. If the
imaging device is intended to be used for mobile applications, the
geographical area(s) of operation may be the state(s) or county(ies)
in which the equipment will be operated. The operator of an imaging
system used for fixed operation shall supply a specific geographical
location or the address at which the equipment will be operated.
This material shall be submitted to:
Frequency Coordination Branch, OET
Federal Communications Commission
445 12th Street, SW,
Washington, D.C. 20554
Attn: UWB Coordination
The form given on the following page is a suggested format for
performing the coordination.
To Next Page
Loading...
Need help?
General
