RD4000 Locating System User Manual
Page 12
Web enabling features
The RD4000 receivers and RD4000T10 transmitters are web enabled, allowing you to register equipment on-
line, configure the equipment, and download frequency and feature upgrades quickly and easily via an Internet
connection.
Note: The RD4000T3 and RD4000T3F transmitters are not Web enabled.
By connecting a transmitter or receiver to a computer and accessing the Radiodetection website, you will be
able to do the following:
• Register new equipment
• Un-register a receiver or transmitter (for example, if it is sold on)
• Configure equipment
• Purchase and download new features
• Perform diagnostics and self-test procedures
• Check when servicing of a receiver or transmitter is due
• Link to the Radiodetection Frequently Asked Questions (FAQ) page
• Change the transmitter or receiver language
• Download updated firmware/software.
The Web enabling features are available through the Radiodetection Website at: http://www.radiodetection.com
PC requirements
You will need a personal computer (PC) or laptop computer running Microsoft Windows 98, Windows 2000,
Windows NT, or XP, and the supplied RS232 communication connection lead. The PC or laptop must have
Internet access through Microsoft Internet Explorer version 5.5 or later, and the Java plug-in, copies of which
are included on the supplied RD4000 training CD.
Caution: Only install Internet Explorer if you feel confident to do so. If you are not sure, check with your
Information Technology (IT) department or seek assistance from IT professional.
Note: Netscape is not supported in this release but may be supported in later versions.
To Next Page
Loading...
Need help?
General
