EasyManuals Logo

Radiodetection RD4000T3F User Manual

Radiodetection RD4000T3F
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
RD4000 Locating System User Manual
Page 8
Note. Radiodetection receivers detect almost all buried cables and most conductors. However, some cables and
conductors do not radiate signals and cannot be detected by Radiodetection receivers. Radiodetection
receivers do not indicate whether a signal is from a single cable, several cables buried side by side or one
cable above another.
The operation of any cable and pipe locator may be adversely affected when used in close proximity to
ferrous materials such as manhole covers and parked cars. Keep a two-metre/six feet distance from these
objects when taking critical measurements such as depth and current. Standing too close to the receiver if
you are wearing steel toe capped boots may also affect the readings
WARNING. This equipment is NOT approved for use in areas where hazardous gases may be present.
WARNING. When using the RD4000 receiver reduce audio level before using headphones.
Dispose of batteries in accordance with your Company's work practice, and the relevant law or guidelines in
your country.
Caution: If the equipment is used in a manner not specified by Radiodetection, the protection provided by the
equipment may be impaired.
The RD4000 system is for use by suitably trained operators only.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Radiodetection RD4000T3F and is the answer not in the manual?

Radiodetection RD4000T3F Specifications

General IconGeneral
BrandRadiodetection
ModelRD4000T3F
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals