Radiodetection RD400PXL-2 - User Manual

RD400PDL-2/PXL-2
User Guide
Revision 0 - 04.97

Radiodetection RD400PXL-2 Specifications

General

Brand	Radiodetection
Model	RD400PXL-2
Category	Security Sensors
Language	English

Summary

RD400 PDL-2;PXL-2 Receiver Introduction

Receiver Use and Fault Finding

Details locating, tracing, pinpointing, and fault finding capabilities.

RD433 HCTX-2 Transmitter Introduction

Transmitter Use and Signal Application

Explains how to apply a signal to a target line using the RD433HCTX-2 Transmitter.

Receiver Controls: Power and Self-Test

On;Off, Battery Status, and Self Test

Explains powering the unit, monitoring battery, and performing self-diagnostics.

Receiver Controls: Signal Selection and Gain

Frequency;Mode Selection and Speaker Control

Gain Adjustment and Response Modes

Receiver Measurement Functions

Depth, Current, and Line;Sonde Measurements

Locator Use Techniques

Pinpointing Target Lines

CD Signal Operation and Sonde Location

Fault Finding Procedures

A-Frame Setup and Transmitter Configuration

Introduces the Accessory A-Frame and details transmitter setup for fault finding.

CD and FF Signal Method Fault Finding

Explains fault finding using CD and FF signal methods with the A-Frame.

Pinpointing Faults and Difficult Ground Conditions

RD433 HCTX-2 Transmitter Operation

Transmitter Controls, Modes, and Frequencies

Transmitter Signal Application Methods

Induction and Direct Connection Techniques

Explains applying signals via induction and direct connection to target lines.

Signal Clamp and Live Plug Connector Usage

Troubleshooting and Safety Guidelines

Reporting Issues and Detector Limitations

Guides on providing problem details and lists warnings about detection capabilities.