Radiolink Electronic Ltd
www.radiolink.com
Refresh Params: exhibit the newest parameters which have modified no the Mission Planner.
Compare Params: compare the current and the previous parameters.
Load Presaved: load the parameters that Radiolink upgrade the files which design for 210-250 frame
racing drone to PIXHAWK.
Reset to default: reset all the parameters to default files. Please recalibrate and re-setup all the
parameters after reset.
Search: write down the name of parameters you want to setup, much same as the keyboard shortcuts
function.
7. Download DataFlash Log
There are two ways to record your flight data. With some exceptions, the two methods record very similar
data but in different ways:
Dataflash logs use the PIXHAWK onboard dataflash memory, which you can download after the flight. On
Plane and Rover dataflash logs are created soon after start-up. On Copter they are created after you first
arm the copter.
Telemetry logs (also known as “tlogs”) are recorded by the Mission Planner (or other ground station)
when you connect ArduPilot to your computer via a telemetry link.
If you are not yet familiar with the basics of these log files, first review the introductory pages to
understand where these logs are stored and how you can download and view the information held within
them.
To Next Page
Loading...
