RADWAG AS X2 Series User Manual

- 105 -
with DHCP set to NO value, enter manually IP; MASK; DEFAULT GATE parameters,
with DHCP set to YES value, the balance software automatically reads and displays data
assigned by Wi-Fi router by means of which the balance is to be connected,
• enter <SCANNING NETWORKS> parameter and start network searching procedure, upon
completion, list of detected networks is displayed along with information on signal strength and
channel number,
• select network of your choice,
• password window is displayed, using an on-screen keyboard enter the password,
• <NETWORK CONFIGURATION> window is displayed, connection procedure starts
automatically,
• Press button to go one level up, <STATUS> parameter features <CONNECTING> sign
informing on the fact that the balance tries to connent the network,
• for successfully established connection <CONNECTING> status turns to <CONNENTED>
status, respective pictogram is displayed (see pictogram overview above)
• if it takes too long to establish connection it may be concluded that connection parameters are
invalid (password etc.), check the parameters and try to reestablish connection,

RADWAG AS X2 Series Specifications

General

Brand	RADWAG
Model	AS X2 Series
Category	Scales
Language	English