RADWAG AS X2 Series

- 101 -
• Status
23.8. AMBIENT CONDITIONS
Ambient Conditions database comprises ambient conditions related information. Depending on the
setup, the ambient conditions record may comprise data such as temperature, humidity, atmospheric
pressure. When the THB module is connected to the balance then its indications are recorded to the
database too.
Procedure:
• Enter < Databases> submenu, press <Ambient conditions> key.
• Press the required record, if not visible scroll the records list down.
• Record name comprises date and time.
• In order to print the record press printer pictogram
CAUTION!
The software saves ambient conditions record in a so called loop, i.e. when the measurement 10 001
is saved, the measurement 1 is automatically deleted from the balance’s memory. Records saved to
balance memory cannot be deleted.
23.9. WEIGHING RECORDS
Each measurement result sent from a balance to a printer or a computer is saved in the database of
weighing records. Balance user can preview data from each weighing record.
Procedure:
• Enter < Databases> submenu.
• Enter <Weighing records> database and press selected record.
Information defined for a weighing record:
• Measurement date
• Measurement time
• Measurement result
• Weight
• Tare value
• User
• Product name
• Customer, Customer name
• Packaging, tare name applied during product measurement
• Working mode name
• Warehouse, source warehouse name
• Result control, information specifying within which threshold limit the obtained result is:
 MIN – below min threshold (possible only if <Result control> is set to <NO> value)
 OK – within min and max threshold,
 MAX – above max threshold (possible only if <Result control> is set to <NO> value)
• Variable 1
• Variable 2
• Variable 3
23.10. ALIBI
Each measurement result sent from a balance to a printer or a computer is saved in Alibi database.
Balance user can preview data from each weighing record.