RADWAG AS X2 Series

- 12 -
AS balance, d=0.01/0.1 mg
AS balance, d=0.1 mg
•
remove a transport lock (1) – gently press the transport lock and turn it accordingly to
<OPEN> instruction
, keep the transport lock should your balance be transported in the
future.
• Install components following the above diagram:
• bottom insert (2),
• centring ring [embossment side up] (3),
• weighing pan (4),
• draft shield (5).
CAUTION!
AS balance with d=0,01/01mg is equipped with 2 weighing pans (standard and open-work). Remember to
calibrate the balance upon changing the pan.
PS balance, d=0.001g PS balance, d=0.01g